미국 팀로시사에서 서킷용 1/10 EP Buggy 차량(22 3.0 EP Buggy)을 새로 출시하였습니다.더욱 효율적인 주행스타일을 위해 3단기어 스랜스미션(4단 기어도 가능합니다.별도로 업그레이드)으로 되였고 경량화된 2.5mm 두께 강화도금된 7075-T6 재질 알류미늄샤시를 사용하였고GEN II 12MM 빅보 쇽은 경기대회시 서킷에서 점프할때 더 높은 탄력을 주어 착지하고 바로 부드럽고 빠른 스타트를 해주도록 디자인되여있습니다.특히 Low FREQUENCY 스프링은 UP 암이 없은데구조인데도 불과하고 소프한 탄력을 줍니다.새로운22 3.0EP Buggy는 리어윙 각도(0°, 4°, 8°) 를 조정할수있도록 되여있습니다. Heavy Duty sLIPPER 시스템은 78t hds 스퍼기어에 홈이 있는 패드가 들어있습니다.tOE 각도는 2.5°에서 4°까지 조절가능하도록 디자인되여있습니다.
<개봉기---출처 youtube>
<조립영상 16배 속도> 출처 youtube
TLR 22 3.0 2륜 버기의 성능은 이미 아래 3개 A메인(ALL 우승) 대회에서 충분히 증명완료~
아래자료들은 tlr raCING 팀 TOP급 프로선수들이 제공한 sETUP sHEET입니다.
Key Features Mid-motor design Revised motor location 12mm closer to diff gear 3-Gear transmission (4-gear available separately) Transverse battery mounting option Optional parts included Revised front and rear suspension geometry Adjustable rear toe and anti-squat Gen II 12mm big bore shocks Updated ball differential HDS slipper
The 22™ 3.0 buggy has been designed to give racers a versatile platform that easily adapts to changing track conditions without requiring a lot tuning changes.
3-Gear Transmission with Revised Motor Location
The motor location is 12mm closer to the diff gear than on the 2.0. This increases the rear weight bias, providing better rear grip on exit, more entry steering and a buggy that, overall, is easier to drive. The new 3-gear transmission decreases chassis roll, greatly improving the vehicle's stability, consistency and braking. A 4-gear transmission is available separately for lower-grip tracks and different driving styles.
No-Compromise, Mid-Motor Design
Focusing solely on a mid-motor design eliminated the weight and engineering compromises inherent in a chassis with two mounting options.
Transverse Battery Mounting
The wider, 2.5mm aluminum chassis and molded mud guards include the option to mount saddle and shorty Li-Po packs across the chassis. Shorty Li-Po packs can also be mounted fore to aft. This allows for more weight bias tuning front to rear and wider placement of battery weight. The result is a more stable buggy without an increase in static weight.
Option Parts Included
Many of the parts included with this kit are popular upgrades that provide everything needed to build a pro-level buggy right out of the box. This includes milled, 7075-T6 aluminum parts like the top shaft, adjustable rear pivot mounts, motor plate, rear camber block, shock bleeder caps and ball stud spacers throughout. Machined shock pistons and bushings, Ti-CN coated shock shafts and hinge pins, C3 spec hub bearings, low frequency springs and the heavy duty slipper system are also included.
Revised Front Suspension Geometry
All-new front caster blocks and suspension arms allow for variable length arm adjustment. This makes it possible to run with short or long front-arm geometry. This, together with the bell crank steering system, provides the same amazing steering 22™ drivers have come to love, but with a more consistent feel between different surfaces. It all adds up to a buggy with neutral balance that requires less tuning from track to track to maximize performance.
Revised Rear Suspension Geometry
The rear pivot is 2mm wider, giving the buggy significantly more grip and stability without losing any corner speed. The rear arm has also been revised with new shock mount locations and a slightly reduced gull wing effect. This, paired with the popular '0 hole' modification that is now designed into the rear shock tower, optimizes the jumping, landing and chassis roll dynamics of the rear end for the higher rear-weight bias.
Lightweight 7075-T6 Aluminum Chassis
This chassis is the same length as the optional 2.5mm chassis for the 2.0 version. It features strategically milled pockets that reduce weight without compromising strength.
Adjustable Rear Toe and Anti-Squat
The rear pivots now accept adjustable inserts that allow you to make quick toe and anti-squat adjustments without having to buy additional parts. Both adjustments are made in 0.5 degree increments. Toe adjustments range from 2.5 to 4.0 degrees. Anti-squat adjustments range from 0.0 to 3.0 degrees.
Gen II 12mm Big Bore Shocks
The new standard for performance and maintenance, these shocks feature: • X-Ring Seals • Machined shock bushings • Machined 2×1.5 and 2×1.6mm pistons • TiCN-coated shock shafts • Aluminum bleeder screw caps • Threaded hard anodized shock bodies • Low frequency springs • Spring cups that snap onto the shock shafts
Updated Ball Differential
The 22 3.0 ball differential delivers super-smooth, long lasting performance thanks to features like: • Flattened 2nd operation outdrives • Revised thrust washers • Tungsten carbide diff and thrust balls • One-piece nut • Self-centering diff gear
HDS Slipper
Heavy Duty Slipper (HDS) pads and 78T HDS spur gears, along with grooved and tapered slipper plates, are included. They all work together to improve slipper consistency and durability.
Product Specifications Type: Buggy Scale: 1/10 Length: 15.0 in (382mm) Width: 9.8 in (250mm) Height: 5.8 in (148mm) Wheelbase: 11.0 in (280mm) Weight: 54.7 oz (1550g) (track ready) Chassis: 2.5mm Milled Plate, 7075-T6 Aluminum Suspension: Lower A-Arm, Upper Adjustable Link Drivetrain: 2WD Motor or Engine: 540 motor Speed Control: Not included Servos: Not included Gear Pitch: 48-pitch Kit/RTR: Kit Shock Type: 12mm Big Bore, Oil Filled Body: 22 3.0 Cab Forward, with optional rear fin Ball Bearings: Full Rubber Seal Ball Bearings Experience Level: Advanced Assembly Time: 3-5 Hours Is Assembly Required: Yes Needed to Complete Recommended(추천) • Motor 모터 • Electronic Speed Control 변속기 • Servo 서보 • Tires 타이어 • Radio System 송수신기 시스템 • Pinion Gear 피니언기어 • Charger 급속충전기