대표번호 : 031-257-8347
빠른상담 : 010-3902-5400(24시간상담가능)
031-257-8347
010-3902-5400
월 - 금 : AM 11:00 - PM 20:00
토,일요일,공휴일 : AM 11:00 - PM 18:00
KAKAOTALK : @pjhyajo
국민 93902540054
예금주. 탑알씨(박지혁)
상품명 | RPM-81562 Front Right Upper & Lower A-arms for the ARRMA Kraton 8S & Outcast 8S |
---|---|
적립금 | 285원 (1%) |
브랜드 | RPM |
상품코드 | RPM-81562 |
배송방법 | 택배 |
배송비 | 3,000원 (50,000원 이상 구매 시 무료) |
판매가 | 28,500원 |
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
RPM-81562 Front Right Upper & Lower A-arms for the ARRMA Kraton 8S & Outcast 8S | 28500 ( 285) |
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Quick Notes:
– lighter than stock by 4.5 grams per upper / lower a-arm pair
– replaces the front right upper A-arm from stock ARRMA #ARA330561
– replaces the front right lower A-arm from stock ARRMA #ARA330589
– one vehicle will require 1 – #81522 & 1 – #81562 for completion of the front end
– rear a-arms also available – RPM #80812
The ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren’t up to the abuse these massive monsters can dish out, look no further than RPM. Our replacement front A-arms are designed with the backyard basher in mind and can handle some serious abuse and come back for more.
Our front lower A-arms have a triple beam style construction designed to spread impact energy across all three beams. Each beam’s cross-section is a whopping 5/8” (15.8mm) tall x 3/8” (9.5mm) wide. These massive beams reduce unwanted flex during normal suspension movement, yet allow impact-absorption during those not-so-perfect landings and crashes. We also moved the inner cross brace away from the chassis, eliminating the droop stop entirely. While this may seem counter-intuitive, our test truck’s chassis was bent at the droop stops, clearly illustrating that extreme impacts were too much for the chassis plate to handle. After all, there’s not much worse than a bent chassis.
Our front upper A-arms use a dual beam construction where each beam is a massive 1/2″ (12.7mm) tall x 3/8” (9.5mm) wide. We eliminated the tube shape over the hinge pin to eliminate built-in molding stresses while beefing up the leading edge hinge pin support to add some much needed strength and durability.
Both upper and lower A-arms are molded with fingernail slots that allow easy access to remove the aluminum support ring (not included) at the pivot ball. Made in the USA from our trademark blend of ultra durable materials, you can’t go wrong with RPM!
Version Notes: RPM A-arms work perfectly with 8S versions of the Kraton & Outcast using ARRMA #330569 Spring Perches. EXB models using ARRMA #330740 Spring Perches may experience interference issues at both the shock mount and sway bars. RPM does not recommend the use of our a-arms on these vehicles since modification of the a-arms may be necessary to eliminate bind at the shocks and sway bars.
Tech Notes: RPM A-arms for the ARRMA Kraton 8S & Outcast 8S are sold as one upper and one lower in each kit. One left (#81522) & one right (#81562) will be needed to complete the front end of one vehicle. RPM A-arms replace the upper A-arms from stock ARRMA #ARA330561 and the lower A-arms from stock #ARA330589.
Installation Notes:: Like stock A-arms, RPM Kraton 8S versions are sold without threads. If the pivot ball hole is difficult to thread using the pivot ball, RPM recommends thread tapping (tap not included) the hole for 3 – 4 threads, but do not tap any further. Additional cut threads will negate the thread-locking capability of our materials.
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다